1. Open Nice Configurator and select Communication Devices from the Lighting module. Install the SwidgetPro driver by selecting + Communication Device.
2. When SwidgetPro has been installed, complete the following steps:
   a. add your Secret Key,
   b. Set the Number Of Devices you are installing,
   c. Choose the Installation Mode. If you are installing less than 10 Swidget devices, choose Auto. If greater than 10, choose Manual.
3. Select Apply, then Discover/Install.
4. Auto Installation Mode – your Swidget devices will be automatically discovered.
5. Manual Installation Mode
   a. Select the driver instance under Lighting Controllers (ex. Swidget Lighting1)
   b. Select Lighting Devices and select the gear icon.
   c. Add the IP addresses of up to 10 Swidget devices and select Apply.
   d. Repeat for multiple driver instances until all Swidget devices have been added.
6. The lighting control capabilities will be available under the Lighting module. The sensor capabilities will be available under the Input/Output module.

Within the Input/Output module, it is highly recommended to avoid confusion that you add unique names for all Numeric Inputs, especially the Power Inputs.