For additional parameters and to learn more, please download our Swidget Z-Wave Universal Insert Configuration guide.

Humidity High Entry Level

Parameter: 128 (0x0080)

Description: Used to set the humidity value that indicates entry into a high/over humidity state.

Range: 0 to 100

Units: Percent

Default: 100

Humidity Low Entry Level

Parameter: 129 (0x0081)

Description: Used to set the humidity value that indicates entry into a low/under humidity state.

Range: 0 to 100

Units: Percent

Default: 0

Humidity High Exit Level

Parameter: 130 (0x0082)

Description: Used to set the humidity value that indicates exit from a high/over humidity state.

Range: 0 to 100

Units: Percent

Default: 100

Humidity Low Exit Level

Parameter: 131 (0x0083)

Description: Used to set the humidity value that indicates exit from a low/under humidity state.

Range: 0 to 100

Units: Percent

Default: 0

Humidity High Delay

Parameter: 132 (0x0084)

Description: Used to set the time duration for high/over humidity state changes.

Range: 0 – 65535

Units: Seconds

Default: 0

Humidity High Entry SET Value

Parameter: 137 (0x0089)

Description: BASIC SET value sent to associated nodes on entry into high/over-humidity state.

Range: 0 – 99 or 255

Units: BASIC CC SET LEVEL

Default: 255 (turn on associated devices)

Humidity High Exit SET Value

Parameter: 138 (0x008A)

Description: BASIC SET value sent to associated nodes on exit from high/over-humidity state.

Range: 0 – 99 or 255

Units: BASIC CC SET LEVEL

Default: 0 (turn off associated devices)

Humidity Low Entry SET Value

Parameter: 139 (0x008B)

Description: BASIC SET value sent to associated nodes on entry into low/under humidity state.

Range: 0 – 99 or 255

Units: BASIC CC SET LEVEL

Default: 255 (turn on associated devices)

Humidity Low Exit SET Value

Parameter: 140 (0x008C)

Description: BASIC SET value sent to associated nodes on exit from low/under humidity state.

Range: 0 – 99 or 255

Units: BASIC CC SET LEVEL

Default: 0 (turn off associated devices)