The Temperature/Humidity/Motion (ZW006UWA) and Air Quality (ZW008UWA) inserts measure temperature at the wall plate, which can read a little differently from the middle of the room. The temperature offset (parameter 96) adds a fixed correction to every reading, in tenths of a degree of the unit selected with parameter 95. For example, −15 lowers the reading by 1.5°. Compare against a thermometer you trust, then set the difference.
On firmware 2.0 the offset is listed to hubs and works correctly in Fahrenheit. Range and details: Swidget Z-Wave Inserts: Technical Reference, under Configuration parameters, Temperature.
Questions: email support@swidget.com or use the contact form at swidget.com.
Comments
0 comments
Please sign in to leave a comment.