Once you connect a Wi-Fi Insert to a Swidget Device, such as an outlet or switch, you can easily move it to another Swidget Device and back again. Simply remove the Insert from the Device by pinching the two side latches, pulling the Insert out and re-insert in a different Device.
When the Insert reconnects to your network, the app will move the Insert to the new Device automatically. We recommend you check your automations and the names of the Inserts to ensure they make sense in the new Device.
The left hand image below shows the Rooms view in the Swidget App before swapping the Inserts in the Office switch and the Hallway lights switch. The right hand image below shows the Rooms view after the Inserts have been swapped. Please note that the Office shows the Hallway lights switch and the Hallway shows an Office light. All of the settings move with the Insert, including the Insert names and the automations.
Outlet to Switch - Switch name taken from Controlled Outlet
Switch to Outlet - Controlled Outlet name taken from Switch, Always-on Outlet named Always-on