How to add a Swidget Z-Wave insert to a Hubitat hub. For the hub side, see Hubitat's Add Device page.
- Plug the insert into its Swidget host and turn the circuit on.
- In the Hubitat web interface, open Devices and select Add Device, then the Z-Wave button under Add device manually.
- Hold the insert's button for 5 to 10 seconds, until the LED turns blue, and let go. Hubitat detects the insert and starts adding it.
- Swidget inserts use S2 security. Choose to include with security and, when asked, enter the first five digits of the DSK printed on the insert's label.
The insert is now available in Hubitat.
Z-Wave Long Range (US and Canada) needs firmware 2.0 and a Long Range QR code: see the Long Range section of Updating a Swidget Z-Wave Insert to Firmware 2.0 (Home Assistant).
The insert's button does different things depending on how long you hold it, and the LED shows which one you will get when you let go: green (1 to 5 seconds) switches the load, blue (5 to 10 seconds) adds it to or removes it from a network, red (10 to 15 seconds) is a factory reset. More: The button in the Technical Reference.
Settings, association groups and parameters: Swidget Z-Wave Inserts: Technical Reference. Questions: email support@swidget.com or use the contact form at swidget.com.
Comments
0 comments
Please sign in to leave a comment.