The Swidget Wall Switch can be operated manually or using the Swidget App if an Insert is installed in the Switch.  The steps below outline how to manually operate the Switch.

Manual Operation

Note: A Swidget Insert is NOT required for Device operation.

With Lights OFF
PRESS and RELEASE either UP or DOWN to turn the lights ON.
With Lights ON
PRESS and RELEASE either UP or DOWN to turn the lights OFF.

With any Wi-Fi Control Insert and the Swidget App

• Pair Insert using the Insert Pairing Instructions
• You can control the Swidget Device from the Rooms screen by toggling the power button OR from the Device details screen

With any Z-Wave Control Insert

• Pair Insert to Z-Wave hub using hub device pairing instructions
• Control the device using specific hub app or interface