The Swidget Dimmer can be operated manually or using the Swidget App if an Insert is installed in the Dimmer. The steps below outline how to manually operate the Dimmer.
Manual Operation
Note: A Swidget Insert is NOT required for Device operation.
The Dimmer supports 3 states:
- OFF
- ON-Dimmed
- ON-Full
From Lights OFF
1. PRESS and RELEASE any button will turn the lights on to the ON-Dimmed level
2. Next PRESS and RELEASE ON will turn the lights from ON-Dimmed to ON-Full
From Lights ON
PRESS and RELEASE OFF will immediately turn the lights off
Light DIMMING Control
With the lights ON:
1. To increase light intensity by single steps, quickly PRESS and RELEASE the +
2. To increase light intensity steadily, PRESS and HOLD + until desired light intensity, then RELEASE
3. To decrease light intensity by single steps, quickly PRESS and RELEASE the -
4. To decrease light intensity steadily, PRESS and HOLD - until desired light intensity, then RELEASE
With any Wi-Fi Control Insert and the Swidget App
- Pair Insert using the Insert Pairing Instructions
- You can control the Swidget Device from the Rooms screen by toggling the power button OR from the Device details screen
With any Z-Wave Control Insert
- Pair Insert to Z-Wave hub using hub device pairing instructions
- Control the device using specific hub app or interface